Grid Brief ENDE

Longi reports a 35.31% perovskite-silicon tandem cell, 35.25% certified, with a redesigned contact molecule

Chinese module maker Longi has developed a perovskite-silicon tandem solar cell with a champion efficiency of 35.31 percent, pv magazine reported on 6 November. Independent testing by China's National Center of Inspection on Solar Photovoltaic Products Quality (CPVT) certified 35.25 percent on a reverse scan and a stabilised efficiency of 35.13 percent.

The improvement comes from the hole-selective contact, a single layer of molecules that assembles itself on the silicon cell and carries positive charges into the perovskite. Common molecules for this job tend to clump together and cover pyramid-textured silicon unevenly. Longi's researchers designed four variants of the widely used 4PACz molecule, called TC0 to TC3, with different amounts of twisting and conjugation. TC2 gave the best balance: simulations showed 83.1 percent surface coverage compared with 75.0 percent for TC1 and 73.3 percent for TC3, and measurements confirmed more than 80 percent with strong anchoring.

According to the researchers, better coverage improved the energy alignment at the interface with the indium tin oxide layer, which speeds the extraction of charges and reduces losses. TC2 also slowed and controlled the crystallisation of the perovskite film on top, producing larger, more uniform grains. The full device stacks a perovskite top cell on a textured heterojunction silicon bottom cell, with lithium fluoride, fullerene and tin oxide layers, a transparent indium zinc oxide electrode, silver contacts and a magnesium fluoride coating.

The champion cell reached an open-circuit voltage of 2.007 V, a short-circuit current density of 20.82 mA per square centimetre and a fill factor of 84.53 percent. Longi says the device kept 94 percent of its initial efficiency after 1,500 hours of continuous operation.

Longi reports a 35.31% perovskite-silicon tandem cell, 35.25% certified, with a redesigned contact molecule
Longi reports a 35.31% perovskite-silicon tandem cell, 35.25% certified, with a redesigned contact molecule — Grid Brief

What it means

Record tandem cells are laboratory devices, not products, but they show where commercial efficiencies may head. The interesting result here is less the headline number than the stability figure and the focus on a contact layer that works on textured silicon, the surface used in mass production.

Written by Victoria Shinder.